• Drop-in Networking
• Embedded
• Wireless
  • Cellular
  • Wi-Fi
  • ZigBee/Mesh
  • Point-to-Multipoint
    • XBee-PRO 868
    • XBee & XBee-PRO 802.15.4 OEM RF Modules
    • XBee-PRO 900
    • XBee-PRO XSC
    • XCite OEM RF Modules
    • XStream OEM RF Modules
    • XBee 802.15.4 Adapters
    • XBee-PRO 802.15.4 RF Modems
    • XStream RF Modems
    • XCite RF Modems
    • XPress Ethernet Bridge
    • XBee XTender RF Bridge
  • Long Range Point-to-Multipoint / Mesh
• Remote Display Connectivity
• Console Servers
• Serial Servers
• Cameras and Sensors
• USB and Serial Connectivity

Home > Products > Wireless > Point-to-Multipoint > XPress Ethernet Bridge

• Overview
• Specs
• Documentation

Indoor/urban range up to 2,000 feet (with high gain antenna) Outdoor line-of-sight range up to 15 miles (with high gain antenna) Does not interfere with Wi-Fi networks 128-bit encryption provides secure data delivery Simple plug-and-play; use DIP switch to choose access point or subscriber unit

The XPress Ethernet Bridge replaces costly wiring with a solution that wirelessly connects industrial PLCs, electronic (LED) signs, Wi-Fi APs, Pan/Tilt/Zoom security cameras, VoIP phones, Internet kiosks and more. With a range of up to 15 miles (line-of-sight with a high gain antenna) and the ability to transmit through as many as 10 standard walls, the XEB uses the added range and capabilities of the 900 MHz band to communicate where Wi-Fi and other wireless data products fall short. The easy-to-use, long-range XEB features a 1.5 Mbps RF data rate.

The XPress Ethernet Bridge is the best solution when:

• Wi-Fi range is insufficient
• An Ethernet cable drop will cost too much or is impractical to install
• Broadband speed is required (Kiosks/Wi-Fi APs/PTZ cameras)
• Low latency for voice or video is required (VoIP/PTZ cameras)
• 900 MHz license-free ISM band is needed for use in the U.S. and Canada 
• An industrial, long-range Ethernet bridge is required

The XPress Ethernet Bridge is available either as a point-to-point matched pair (two modems) or a multipoint transceiver. The point-to-point model is ideal for applications needing to wirelessly connect only two Ethernet devices. If the application requires (or in the future might require) connecting more than two Ethernet devices, the multipoint model is an excellent option. Each multipoint model has a DIP switch that allows the user to easily configure it as an access point (base radio) or a subscriber unit (remote radio).


*Industrial version shown with optional high gain antenna.

Model/Part Numbers

USA/Canada	North America:	International:
New - XPress Ethernet Bridge - Multipoint - Commercial (Indoor) with Accessories - 900 MHz, 125 mW, 128-bit encryption, USA/Canada View details	XEB09-BCSA	Not available	Contact us
New - XPress Ethernet Bridge - Multipoint - Commercial (Indoor) without Accessories - 900 MHz, 125 mW, 128-bit encryption, USA/Canada View details	XEB09-BCS	Not available	Contact us
New - XPress Ethernet Bridge - Multipoint - Industrial (Outdoor) with Accessories - 900 MHz, 125 mW, 128-bit encryption, USA/Canada View details	XEB09-BISA	Not available	Contact us
New - XPress Ethernet Bridge - Multipoint - Industrial (Outdoor) without Accessories - 900 MHz, 125 mW, 128-bit encryption, USA/Canada View details	XEB09-BIS	Not available	Contact us
XPress Ethernet Bridge - Point-to-Point - Commercial (Indoor) with Accessories - 900 MHz, 125 mW, 128-bit encryption, USA/Canada View details	XEB09-C	Not available	Contact us
XPress Ethernet Bridge - Point-to-Point - Industrial (Outdoor) with Accessories - 900 MHz, 125 mW, 128-bit encryption, USA/Canada View details	XEB09-I	Not available	Contact us
Australia	North America:	International:
XPress Ethernet Bridge - Point-to-Point - Commercial (Indoor) with Accessories - 900 MHz, 125 mW, 128-bit encryption, Australia View details	Not available	XEB09-C-AU	Contact us
XPress Ethernet Bridge - Point-to-Point - Industrial (Outdoor) with Accessories - 900 MHz, 125 mW, 128-bit encryption, Australia View details	Not available	XEB09-I-AU	Contact us